Compex-technologies WPE54 Manual de usuario descargar pdf (Pagina 67)

Chapter 5 Further Configuration

4.5.2 How to set up WPA-PSK

[Available in AP/Gateway mode ONLY]

The guidelines below will help you to set up the access point for using WPA-

PSK. Please take note that the WPA-PSK, WPA2-PSK and WPA-PSK-

AUTO security modes share the same functions).

Security Mode –WPA-PSK, WPA2-PSK, WPA-PSK-AUTO

At the WLAN Security Setup

page:

Select WPA-PSK mode.

Click on Apply button.

Specify the key entry format by

selecting either:

• Passphrase (Alphanumeric

characters)

• Hexadecimal

Fill in the pre-shared network

key.

If you are using the Passphrase format, your entry can consist of a minimum of 8

alphanumeric characters or a maximum of 63 alphanumeric characters.

Otherwise, when using the Hexadecimal format, your entry MUST

consist of 64

hexadecimal characters.

The Cipher Type is set to TKIP.

Define the GTK update (Group Transient Key update), or the length of time after which the

access point will automatically generate a new master key.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 136 137

Sin comentarios

Compex-technologies WPE54 Manual de usuario Pagina 67