Compex-technologies WPE54 Manual de usuario descargar pdf (Pagina 108)

Chapter 5 Further Configuration

107

5.7.3 To enable Parallel Broadband

Before enabling the Parallel Broadband feature, verify whether:

• Each of the access points is correctly configured to connect to its specific

broadband Internet account.

• You need to enable DHCP on all of the access points in Parallel

broadband. It is recommended that each of the access points leases IP in a

non-overlapping IP address pool.

• All of the access points are interconnected in a chain manner using WDS

as illustrated in the section on WLAN Basic Setup.

• Each of the access points is running in Gateway mode with the Parallel

Broadband option enabled.

Enable Parallel Broadband

Click on Parallel Broadband from the CONFIGURATION menu.

By default the Parallel

Broadband feature is disabled.

Enable the Parallel Broadband

Status.

Click on Apply button.

Repeat this for the other access

points in your network.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 136 137

Sin comentarios

Compex-technologies WPE54 Manual de usuario Pagina 108